Technical information
SUPERCHLON S-2426S
1. Introduction
SUPERCHLON S-2426S is a newly developed product specially introduced into PP primer
market, which provide better adhesion for the higher molecular weight compared to
other grades.
It is also suitable for adhesive, ink and paint application for the good adhesion to
ABS, polyester and nylon as well as polypropylene.
2. General properties
Appearance Odor
Free chlorine Good solvents
Pale-yellow to light-brown pellet A little resin odor
None
Toluene, Xylene (aromatic hydrocarbons) Cyclohexane, Mineral Spirit,
Methylcyclohexane (alicyclic hydrocarbons) Aliphatic hydrocarbons (n-hexane etc.),
alcohol (IPA, butanol etc.)
and esters can be used as the diluent.
3. Typical data (provisional value)
Chlorine content (%)
|
19.0 – 21.0
|
Viscosity (mPa·s at 25°C)
|
120 - 200 (*)
|
Color number (Gardner)
|
6 and below
|
(*) Solid content: 20%
|
|
Solvent: Toluene / Cyclohexane / Isopropyl alcohol = 64 / 33 / 3
These properties are typical of average lots. Nippon Paper Industries makes no representation that the material in any particular shipment will conform to the listed properties.
Handling Instruction: The solution of this product has a nature to cause viscosity increase, gelling and fine particles in winter season, but in terms of its performance, this will not be a issue if warm up to 40-50°C (104-122°F) again before using.
Superchlon S-2426S |