SUPERCHLON LQ2342S
1. Introduction
SUPERCHLON LQ2342S is a newly developed product specially introduced
into PP primer market, which provide better adhesion for the higher molecular weight
compared to other grades.
It is also suitable for adhesive, ink and paint application
for the good adhesion to ABS, polyester and nylon as well as polypropylene.
2. General properties
Appearance Pale-yellow to light-brown pellet
Odor A little resin odor
Free chlorine None
Good solvents Toluene, Xylene (aromatic hydrocarbons)
Cyclohexane, Mineral Spirit,
Methylcyclohexane
(alicyclic hydrocarbons) Aliphatic hydrocarbons (n-
hexane etc.),
alcohol (IPA, butanol etc.)
and esters can be used as the diluent.
3. Typical data
Chlorine content (%)
|
20.0 - 22.0
|
Viscosity (mPa.s at 25 degrees C)
|
10 - 120 (*)
|
Color number (Gardner)
|
6 and below
|
(*) Solid content: 20%
|
|
Solvent: Toluene / Cyclohexane / IPA = 87 / 10 / 3
These properties are typical of average lots. Nippon Paper Industries makes no representation that the material in any particular shipment will conform to the listed properties.
Handling Instruction: The solution of this product has a nature to cause viscosity increase, gelling and fine particles in winter season, but in terms of its performance, this will not be a issue if warm up to 40-50 degrees C (104-122 degrees F) again before using.
- 1 - Superchlon LQ2342S
