SUPERCHLON LQ1805S
1. Introduction
SUPERCHLON LQ1805S is a newly developed chlorinated polypropylene which provides excellent solubility into non-toluene solvent and strong adhesion to OPP films.
2. General properties
Appearance: Colorless to pale-yellow pellet Odor: Resin itself
Toxicity: None Free chlorine: None
Dry film: Colorless, transparent and flexible, thermoplastic film Flammability: None flammable (dry film)
* Because of low softening point of the resin, pellet may adhere each other to be lump in a certain circumstance.
3. Typical specification
Chlorine content (wt%): 31.0 - 33.0
Viscosity (mPa∙s, 25°C): 100 - 500 Gardner Color No.: 6 or less
* Viscosity and color measurement: 30 wt% toluene solution
These properties are typical of average lots. Nippon Paper Industries makes no representation that the material in any particular shipment will conform to the listed properties.
Handling Instruction: The solution of this product has a nature to cause viscosity increase, gelling and fine particles in winter season, but in terms of its performance, this will not be an issue if warm up to 40-50°C (104-122°F) again before using.
4. Solubility test data
Solvent type
|
Viscosity (mPa・s, 25°C / 20% solid content)
|
LQ1805S
|
Ethyl acetate (EA)
|
50
|
Methylcyclohexane/EA = 1/1
|
50
|
|
|
SUPERCHLON LQ1805S Page 1 of 1Preparation: 180709 Nippon Paper Industries |
|